Air Traffic Controllers *Nature of the Work

من طرف cap.abdelrahman osama الخميس مايو 08, 2008 9:51 pm

The air traffic control system is a vast network of people and equipment that ensures the safe operation of commercial and private aircraft. Air traffic controllers coordinate the movement of air traffic to make certain that planes stay a safe distance apart. Their immediate concern is safety, but controllers also must direct planes efficiently to minimize delays. Some regulate airport traffic through designated airspaces; others regulate airport arrivals and departures.
Although airport tower controllers or terminal controllers watch over all planes traveling through the airport’s airspace, their main responsibility is to organize the flow of aircraft into and out of the airport. Relying on radar and visual observation, they closely monitor each plane to ensure a safe distance between all aircraft and to guide pilots between the hangar or ramp and the end of the airport’s airspace. In addition, controllers keep pilots informed about changes in weather conditions such as wind shear, a sudden change in the velocity or direction of the wind that can cause the pilot to lose control of the aircraft.
During arrival or departure, several controllers direct each plane. As a plane approaches an airport, the pilot radios ahead to inform the terminal of the plane’s presence. The controller in the radar room, just beneath the control tower, has a copy of the plane’s flight plan and already has observed the plane on radar. If the path is clear, the controller directs the pilot to a runway; if the airport is busy, the plane is fitted into a traffic pattern with other aircraft waiting to land. As the plane nears the runway, the pilot is asked to contact the tower. There, another controller, who also is watching the plane on radar, monitors the aircraft the last mile or so to the runway, delaying any departures that would interfere with the plane’s landing. Once the plane has landed, a ground controller in the tower directs it along the taxiways to its assigned gate. The ground controller usually works entirely by sight, but may use radar if visibility is very poor.
The procedure is reversed for departures. The ground controller directs the plane to the proper runway. The local controller then informs the pilot about conditions at the airport, such as weather, speed and direction of wind, and visibility. The local controller also issues runway clearance for the pilot to take off. Once in the air, the plane is guided out of the airport’s airspace by the departure controller.
After each plane departs, airport tower controllers notify enroute controllers who will next take charge. There are 21 air route traffic control centers located around the country, each employing 300 to 700 controllers, with more than 150 on duty during peak hours at the busiest facilities. Airplanes usually fly along designated routes; each center is assigned a certain airspace containing many different routes. Enroute controllers work in teams of up to three members, depending on how heavy traffic is; each team is responsible for a section of the center’s airspace. A team, for example, might be responsible for all planes that are between 30 and 100 miles north of an airport and flying at an altitude between 6,000 and 18,000 feet.
To prepare for planes about to enter the team’s airspace, the radar associate controller organizes flight plans coming off a printer. If two planes are scheduled to enter the team’s airspace at nearly the same time, location, and altitude, this controller may arrange with the preceding control unit for one plane to change its flight path. The previous unit may have been another team at the same or an adjacent center, or a departure controller at a neighboring terminal. As a plane approaches a team’s airspace, the radar controller accepts responsibility for the plane from the previous controlling unit. The controller also delegates responsibility for the plane to the next controlling unit when the plane leaves the team’s airspace.
The radar controller, who is the senior team member, observes the planes in the team’s airspace on radar and communicates with the pilots when necessary. Radar controllers warn pilots about nearby planes, bad weather conditions, and other potential hazards. Two planes on a collision course will be directed around each other. If a pilot wants to change altitude in search of better flying conditions, the controller will check to determine that no other planes will be along the proposed path. The team responsible for the aircraft notifies the next team in charge of the airspace ahead as the flight progresses. Through team coordination, the plane arrives safely at its destination.
Both airport tower and enroute controllers usually control several planes at a time; often, they have to make quick decisions about completely different activities. For example, a controller might direct a plane on its landing approach and at the same time provide pilots entering the airport’s airspace with information about conditions at the airport. While instructing these pilots, the controller also might observe other planes in the vicinity, such as those in a holding pattern waiting for permission to land, to ensure that they remain well separated.( المراقبة الجوية من التخصصات النادرة في العالم والتي لا يمكن للطائرات أن تتحرك من أماكنها إلا بعد التنسيق والأذن من قبل المراقبن الجويين)

من طرف **Ahmed Motamed** الجمعة مايو 09, 2008 7:34 am

Good work my friend
and iam agree with you about the job of ATC
it the most hard , exciting and dangerous work that you can do
and without ATC there will be no civil aviation